Slate Bed Pool Table Removals
Slate is what makes a good table play well and what makes it demanding to move. We treat a slate-bed table as a set of heavy, brittle components rather than one large item of furniture.
Slate-bed tables will usually require dismantling and reassembly. Where a table is described as slate but we cannot confirm it from your photographs, we quote on the basis of dismantling and tell you so.
Get an instant pool table moving estimate
Enter two postcodes and answer three quick questions.
Why the slate has to stay supported
A slate slab resists load across its face and cracks under a twist or a point load. Carried flat with hands or straps spread along its length, it behaves predictably. Tipped onto an edge, walked round a tight turn at an angle or rested on a step, it can break — and a broken slate is not repairable in any way that plays true.
That is why the carry route matters as much as the lift. A staircase with a half-landing, a doorway at 750mm, or a threshold that forces the slab to tilt all change how the slate must be handled, and sometimes whether the route can be used at all.
One-piece and sectional slates
English pub tables often have a single slate bed. American tables usually have three sections that must go back in the same order and orientation, with the joints packed as they were. We label sections as they come out so the bed is rebuilt as the manufacturer intended.
Weight per slab varies widely with size and thickness. If you know the model, tell us — it is the quickest route to an accurate crew and vehicle plan.
What we need to quote
- Confirmation that the bed is slate, plus the number of sections if known
- Table size and manufacturer or model
- Photographs of the whole table and underneath it
- Doorway widths, stairs and turns on the route at both ends
- Whether reassembly, positioning and levelling are required
How we quote
The calculator above gives you an instant estimate from the postcodes, the table size, the service you need and the access at each end. Your fixed price is confirmed once we have seen the table construction, photographs and access.
Frequently asked questions
Can a slate-bed table be moved in one piece?
As a rule, no. Slate-bed tables will usually need dismantling, and we will not tilt, drag or carry one whole to save time.
How heavy is a slate?
Heavy enough that each slab is treated as a lift in its own right — commonly comparable to a large domestic appliance. The exact weight depends on size and thickness, so the model helps.
What if a slate is already cracked?
Tell us and send a photograph. We will still move the table where it is safe to do so, and we record the existing condition before we start.
Do you replace slate?
No. Slate supply, bed re-bedding and re-clothing are fitting work — we will point you to a table fitter.
More on pool table removals
Check availability for your pool table move
Send the postcodes, the table details and photographs of the table and the access at both ends. We will confirm a fixed price and what we have assumed.